Qatalitic 3 in 1 Corner Cutter Punch for DIY Art & Crafts, Photo Cutter, Project Book making, Angle Eater (Size - R4mm, R7mm and R10mm)

Book Description

• Great for cutting corners: Rounding corners on photos, name cards, papers, cardstocks, stationery, Invitations, thin foam sheets and other all kinds of paper sheets This type of embossing device requires high quality paper.
• Please use 160 GSM - 220 GSM paper.
• If your paper is too thin, please use 2-3 layers.
• For sharpening cutting mechanism, cut thin aluminum foil.
• For lubricating cutting mechanism, cut out wax paper and foam color paper Note- a.
• If the cuts are not perfect then try to adjust the edge properly.
• b.
• Try to turn the punch upside down to see if the edges have been set properly in the punch.
• c.
• Avoid using too thick PVC sheets as it could damage the cutter.
• d.
• Just like every machine this product too has a life cycle.
• The sharpness of the blades decreases after multiple uses.
• Note- e.
• Always clean the cutter properly after using to ensure perfect cuts afterward.
• f.
• Avoid using wet and oiled paper as it can leave small tiny bits inside the cutter.
• g.
• If processing a self-adhesive sheet then make sure to use a good quality self-adhesive sheet.
• h.
• When you use any sheet, always make sure that the edges should be clean and straight, for a perfect round-cut.